User's Manual Part 1

24 Calling
To make a call using the magic word
1 In standby make sure is visible.
2 Say the magic word.
3 Wait for the tone and say a voice
command.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select Menu > Settings
> the General tab > Voice control > Voice
answer > Activate.
2 Follow the instructions that appear and
select Cont. Wait for the tone and say
“Answer”, or another word.
3 Select Ye s to accept or No for a new
recording.
4 Follow the instructions that appear and
select Cont. Wait for the tone and say
“Busy”, or another word.
5 Select Ye s to accept or No for a new
recording.
6 Follow the instructions that appear and
select Cont.
7 Select where your voice answering is
to be activated.
To answer a call using voice
commands
• Say “Answer”.
To reject a call using voice
commands
• Say “Busy”.
Diverting calls
You can divert calls, for example, to
an answering service.
To divert calls
1 From standby select Menu > Settings
> the Calls tab > Divert calls.
2 Select a call type and a divert option.
3 Select Activate.
4 Enter the number to divert calls to and
select OK.
More than one call
Call waiting
When call waiting is used, you hear
a beep if you receive a second call.
When Restrict calls is used, some divert
call options are not available. See
Restricted dialling on page 26.
Shinobu_UG_P1C.book Page 24 Friday, June 22, 2007 3:10 PM
0REFLIGHTEDBY
0REFLIGHTEDBY

