User's Manual Part 1
23Calling
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear. Wait
for the tone and say the command to
record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes
. If
not, select
No and repeat steps 3 and 4.
To re-record a voice command
1 From standby select Menu > Settings
> the General tab > Voice control > Voice
dialling > Edit names.
2 Scroll to a command and select Options
> Replace voice.
3 Wait for the tone and say the
command.
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down a
volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
To make a call with a handsfree
• From standby press the handsfree key.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialling without pressing any
keys. Your handsfree must be
connected to your phone when using
the magic word.
To activate and record the magic
word
1 From standby select Menu > Settings
> the General tab > Voice control > Magic
word > Activate.
2 Follow the instructions that appear and
select Cont. Wait for the tone and say
the magic word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear and
select Cont.
5 Select where your magic word is to be
activated.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone. You should choose a long, unusual
word or phrase that can easily be
distinguished from ordinary background
speech. Bluetooth handsfree does not
support this feature.
Shinobu_UG_P1C.book Page 23 Friday, June 22, 2007 3:10 PM
0REFLIGHTEDBY
0REFLIGHTEDBY