User's Manual

22 Calling
Video call
See a person on screen during calls.
Before you start
To make a video call, both you and the
person you are calling need a
subscription that supports the 3G
(UMTS) service, and you need to be
within range of a 3G (UMTS) network.
3G (UMTS) service is available when
the 3G icon appears in the status bar.
Video call demo mode
You can use most video call functions
without making a call, for example, to
prepare a camera view before calling.
} Organizer } Video call.
To make a video call
• When 3G (UMTS) service is available,
you can make a video call in one of the
following ways:
• Enter a phone number (international
prefix and area code if applicable)
} More } Make video call.
• } Contacts and select the contact
to call. Use or to select a
number } More } Make video call.
• } Organizer }
!
Video call } Call...
} Contacts to retrieve a phone
number } Call or enter a phone
number } Call.
To zoom the outgoing video in or out
• Press to zoom in the outgoing
video and press to zoom out.
To accept an incoming video call
• } Answer.
To end a video call
• } End call.
Video call options
} More for the following options:
• Switch camera – switch between the
main and video call cameras. Use the
main camera to show a full image of
your surroundings to the recipient.
• Stop camera/Start camera – turn the
video camera off or on. An alternative
picture is shown when off.
• Save picture – save the image shown
in the large view, for example, the
incoming caller image.
• Camera – options
• Brightness – adjust the level for the
outgoing picture.
• Turn on night m. – use when
lighting conditions are poor. This
setting affects the outgoing video.
• Sound – options during a video call
• Turn off speaker/Turn on speaker –
incoming sound.
• Mute microphone/Unmute mic. –
microphone off or on.