User's Manual

18 Calling
A 3G (UMTS) service is available when
the 3G icon appears in the status bar.
Video call demo mode
You can use most video call functions
without making a call, for example, to
prepare a camera view before calling.
} Video call.
To make a video call
When a 3G (UMTS) service is
available, you can make a video call in
one of the following ways:
• Enter a phone number (international
prefix and area code if applicable) }
More } Make video call.
• } Contacts and select the contact to
call. Use or to select a number }
More } Make video call.
• } Video call } Call.... } Contacts to
retrieve a phone number } Call or
enter a phone number } Call.
To zoom the outgoing video in or out
Press to zoom in the outgoing
video and press to zoom out.
To accept an incoming video call
} Answer.
To end a video call
} End call.
Video call options
} More for the following options:
• Switch camera – to switch between
the main and video call cameras. Use
the main camera to show a full image
of your surroundings to the recipient.
• Stop camera/Start camera – turn the
video camera off or on. An alternative
picture is shown when off.
• Save picture – save the image shown
in the large view, for example, the
incoming caller image.
• Camera – options
• Brightness – adjust the level for the
outgoing picture.
• Turn on night m. – use when
lighting conditions are poor. This
setting affects the outgoing video.
• Sound – options during a video call
• Turn off speaker/Turn on speaker –
incoming sound.
• Mute microphone/Unmute mic. –
microphone off or on.
• Transfer sound – to and from
Bluetooth handsfree equipment.
• Layout – options
• Switch pictures – show incoming or
outgoing video in full size view.
• Hide small pic./Show small pic.
• Mirror image – show the outgoing
camera picture.