User's Manual Part 1

30 Calling
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice answer > Activate.
2 Follow the instructions that appear
and select Cont. Wait for the tone and
say “Answer”, or another word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear
and select Cont. Wait for the tone and
say “Busy”, or another word.
5 Select Yes to accept or No for a new
recording.
6 Follow the instructions that appear
and select Cont.
7 Select where your voice answering is
to be activated.
To answer a call using voice
commands
• Say “Answer”.
To reject a call using voice
commands
• Say “Busy”.
Diverting calls
You can divert calls, for example, to
an answering service.
Divert call options
Standard options are:
• Divert always – divert all your calls
• When busy – if a call is ongoing
• Not reachable – if your phone is
turned off or unreachable
• No reply – if a call is not answered in
a specified time
To divert calls
1 From standby select Menu > Settings
> the Calls tab > Divert calls.
2 Select a call type and a divert option.
3 Select Activate.
4 Enter the number to divert calls to and
select OK.
When Restrict calls is used, some divert
call options are not available. See
Restricted dialling on page 33.
.FB8*BB$(ERRN3DJH0RQGD\2FWREHU30