User's Manual

5Getting started
Turning on the phone
Charge the phone and insert the SIM
card before turning the phone on. Use
the setup wizard to prepare for use.
To turn on the phone
1 Press and hold down . The first
startup may take a few minutes.
2 Select to use the phone in:
• Normal Mode – full functionality.
• Flight Mode – limited functionality
with network, FM radio and
Bluetooth™ transceivers off % 6 Flight
mode.
3 Enter your SIM card PIN, if requested.
4 At first startup, select the language.
5 Select Yes for the setup wizard to help
you.
6 Follow instructions to complete setup.
SIM card
The SIM (Subscriber Identity Module)
card, which you get from your network
operator, contains information about
your subscription. The SIM card keeps
track of information such as your
phone number and names and
numbers in your contacts.
PIN
You may need the PIN (Personal
Identity Number) for your SIM card to
start phone services. When entering
the PIN, each digit appears as *,
unless it starts with the digits of an
emergency number, like 112 or 911.
Press to correct mistakes.
Standby
After you turn your phone on and enter
your PIN, the name of the network
operator appears on the display. This
is called standby.
Save contacts on your SIM card before
removing it from the phone.
If you enter the wrong PIN three times in
a row, PIN Blocked appears. To unblock
it, you need to enter your PUK (Personal
Unblocking Key) % 64 SIM card lock.
Laura-UG-R1A-AE.book Page 5 Thursday, March 15, 2007 9:26 AM