User's Manual

48
To turn increasing ring on or off
} Settings }
YES } Sounds & alerts } YES } Increasing ring.
Select On or Off.
Sounds & alerts
You can choose to be notified of an incoming call by the
buzzing of the vibrating alert. You can set the phone’s
vibrating alert to On, On if silent or Off.
From Sounds & alerts in the Settings menu, you can also
select:
• Message alert when messages are received.
• Key sound when using the keypad.
To set the vibrating alert
1 } Settings } YES } Sounds & alerts } YES } Vibrating
alert } YES.
2 Select the setting you want } YES.
Display light
The display light can be set to On or Automatic. Automatic is
the default setting for the display light and is designed to
optimize standby time. In automatic mode, the display light is
turned off a few seconds after you last press a key.
To activate the screen
Press from standby.
To set the display light
} Settings }
YES } Display } YES } Light } YES.
If set to On, the display light consumes extra battery
power and reduces standby time.
J230A-UG-EN.book Page 48 Tuesday, February 14, 2006 9:37 AM