User's Manual

24
Call cost and cost information
Check with your network operator or service provider for
information about these services.
To check the call cost and reset cost meter
1 } Calls } YES } Time and cost } YES } Call costs } YES.
2 Select an option } YES.
3 Select Clear total cost to reset the call cost meter.
Setting the call cost
You can use the tariff function to specify the price per call
unit. If you do not specify a price per call unit, the number of
call units is displayed.
To enter the price per call unit
1 } Calls } YES } Time and cost } YES } Call costs } YES
} Set tariff } YES.
2 Enter your PIN2 } YES.
3 Select Change tariff } YES.
4 Enter the code for the currency you want, (for example
GBP for Pounds Sterling) } YES.
5 Enter the price per call unit } YES. To enter a decimal
point, press .
Credit limit for calls
You can enter a total amount of money that can be used for
making calls. When the amount reaches zero, no more calls
can be made. Please note that the credit limit is only an
estimated value.
If you subscribe to cost information, you must enter
your PIN2 to clear the cost or time counter,
% 65 Security for information about PIN2.
J230A-UG-EN.book Page 24 Tuesday, February 14, 2006 9:37 AM