User's Manual

Using Mobile Internet 51
Using the WAP browser
To start browsing
1. Press and hold the key.
To reset your WAP Profile, do the following:
1. First select the WAP profile you want to use. Scroll to
Web Services,
YES, Options, YES, WAP Profiles, YES.
2. Then select one of the following:
• Open your homepage.
• Go to one of your bookmarks. Select Bookmarks,
YES.
• Enter the address of a WAP site. Select Enter Address,
YES, Add Address to enter a new WAP address or
select one of the 10 latest entered addresses.
Tip: When you enter a WAP address, the normal http:/
/ prefix is not needed.
To exit WAP and disconnect
• Press and hold
NO or
• Press , select Exit WAP.
Options when browsing
When you have started browsing, you can
reach different browsing options by pressing
.
• Home – Go to the homepage set for the current WAP
profile.
• Back – Go back to the previous page.
• Bookmarks – Add the site you are currently browsing
to your list of bookmarks, or see the list of bookmarks
for the current profile.
• Enter Address – Enter the WAP address of a site you
want to visit.
• Save Picture – Save a picture from the site.
• SendAsTextMsg – Send a text message with a link to
the current WAP page to another phone.
• Send Link – Send a link to the current site to another
phone.
• Reload – Refresh the contents of the WAP page.
• Exit WAP – Disconnect and go to standby.
• Status – Display current status information, for
example, profile, access type, connection time, data
rate, security, address.
• Set as Homepg – Set the current site as the homepage
of the WAP profile you are using.
T226.book Page 51 Thursday, July 31, 2003 2:28 PM