User's Manual

40 Setting up Mobile Internet
4. Select the setting you want to edit, YES. Edit the
setting,
YES.
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
To select preferred mode
• Scroll to Connect,
YES, Data Comm., YES Pref.
service and select GPRS and GSM or GSM Only.
Note: To see the status of GPRS coverage and
connection, press the upper or lower side volume key
from standby to enter the Status menu and then scroll
to GPRS.
WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet.
Tip: If there are no data account or WAP profile
settings in your phone, you can enter data account
settings when you enter WAP profile settings. See Web
Services,
YES, Options, YES, WAP Profiles, YES, Add
Profile,
YES, Enter a name, YES, Connect Using, YES,
Add Account,
YES.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
“Data account settings” on page 38.
2. Scroll to Web Services,
YES, Options, YES, WAP
Profiles,
YES.
3. Select Add Profile to add a new profile or select an
existing profile that you want to edit,
YES.
When selecting Add Profile enter a name for the
profile,
YES, Connect Using, YES, select the data
account to be used,
YES and enter the IP Address, YES.
A list appears. Scroll to Save?,
YES.
When selecting an existing profile, you can do the
following:
• Rename – Change the name of the profile.
• Connect Using – Select data account.
• IP Address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete – Remove the profile.
T226.book Page 40 Thursday, July 31, 2003 2:28 PM