User's Manual

20 Personalizing your phone
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a personal
ring signal to numerous callers.
To set a specific ring signal for a caller
1. Scroll to Phonebook,
YES, Personal Rings, YES, Add
New,
YES.
2. Enter the first letter of the contact name,
YES.
3. Select a contact,
YES.
4. Select a ring signal,
YES.
Note: You cannot assign a ring signal to a number
stored only on your SIM card.
Sounds & Alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to one of the following:
• On – all the time.
• On If Silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
To set the vibrating alert
1. Scroll to Settings,
YES, Sounds & Alerts, YES,
Vibrating Alert,
YES.
2. Select the setting you want,
YES.
From Settings,
YES, Sounds & Alerts, you can also
select:
• Alarm Signal that you hear during an alarm.
• Message Alert when messages are received.
• Key Sound when using the keypad.
• Minute Minder to beep after every minute during calls.
Menu language
Most SIM cards automatically set the menu language
to the language of the country where you bought your
SIM card. If this is not the case, the preset language is
English.
To change the menu language
1. Scroll to Settings,
YES, Language, YES, Menus, YES.
2. Select a language,
YES.
T226.book Page 20 Thursday, July 31, 2003 2:28 PM