User's Manual

68 Transferring and exchanging information
To send an item
After you select Bluetooth as the transfer method, a
list of possible receivers is presented. First in the list
will be the last device you were in contact with and
devices that have been previously added to your
phone. The phone also searches for other devices
which are shown in the list
Tip: You can send certain items in your phone
(calendar overviews, appointments and tasks,
contacts, text messages) to specific Bluetooth
printers.
Note: In countries where the use of Bluetooth
wireless technology is not allowed, you must
ensure that the Bluetooth function is set to Off.
Infrared port
You can use the built-in infrared port to establish
contact between your phone and a PC or another
device equipped with an infrared port.
Activate the infrared port
Before you can connect to another infrared device
you have to activate the infrared port in your phone.
• To activate the infrared port, scroll to Connect,
Infrared Port. From standby, you can also select
More, Turn On IR.
Note: To conserve battery power, turn off Infrared
when not in use.
Note: Infrared will remain on for 10 minutes after
the last item is sent or received.
To connect two devices
1. Place your phone as in the picture. The infrared port
on the phone must face the infrared port on the other
device.
Note: If you are connecting to a PC, make sure your
PC has activated infrared communication (Start,
T610UG-R3A.book Page 68 Tuesday, May 27, 2003 5:16 PM