User's Manual

32
Calling
Draft for Sony Ericsson Internal Use Only
Call time and cost
During a call, the duration of the call is shown on
the screen. If you subscribe to cost information,
you can check the duration of your last call,
outgoing calls and total time.You can also check
the cost of your last call and the total cost of your
calls.
To check or reset the call time
} Settings } the Calls tab } Time & cost } Call
timers. To reset the call time meter } More and
select Reset total or Reset outgoing.
To check or reset the call cost
} Settings } the Calls tab } Time & cost } Call
costs. To reset the call cost meter, } More } Clear
total cost.
Setting the call cost
You can use the tariff function to specify the price
per call unit. If you do not specify a price per call
unit, the number of call units appears.
To enter the price per call unit
1 } Settings } the Calls tab } Time & cost } Call
costs } More } Set tariff.
2 Enter your PIN2 } OK.
3 } Currency and enter the code for the currency
you want, (for example GBP for Pounds
Sterling) } OK.
4 } Units and enter the price per call unit } OK.
To enter a decimal point, press .
Credit limit for calls
You can enter a total amount of money allowed for
making calls. When the amount reaches zero, no
more calls can be made. Please note that the credit
limit is only an estimated value.
To set a credit limit
} Settings } the Calls tab } Time & cost } Call costs
} More } Set credit and enter your PIN2 } OK.
Select Limited or Unlimited. If you select Limited,
enter an amount } OK.
Call priority service
You can request a certain priority when you make a
call, if you subscribe to the call priority service.
If you subscribe to cost information, you must enter
your PIN2 to reset the cost or time counter.
Tamao_UG_PA3.book Page 32 Wednesday, May 19, 2004 10:26 AM