User's Manual

34
Calling
R1A Draft for US FCC approval only
zero, no more calls can be made. Please note that
the credit limit is only an estimated value.
To set a credit limit
1 } Settings } the Calls tab } Time & cost } Call
costs } More } Set credit and enter your PIN2
} OK.
2 Select Limited or Unlimited. If you select
Limited, enter an amount } OK.
Call priority service
To check or change your standard
priority level
1 } Settings } the Calls tab } Manage calls }
Default priority.
2 The network sends available priority levels.
Select a priority level.
To change the priority for one call
1 Enter the phone number you want to call.
2 } More } Call priority and select a priority. The
number is called.
Closed user groups
To add a group
1 } Settings } the Calls tab } Manage calls }
Closed groups } Edit list } New group } Add.
2 Enter the name of the user group } Continue.
3 Enter the index number } Save. You get the
index number from your network operator.
To call outside a closed user group
} Settings } the Calls tab } Manage calls } Closed
groups } Open calls } On. When Off is selected, it
is only possible to call within the group.
You can request a certain priority when you make a
call, if your subscription supports the call priority
service. The priority levels are defined by your
network operator and are normally within the range
of 0-4, where 0 is the highest priority.
The closed user group function is a way of
lowering call costs. If you subscribe to closed user
groups it is cheaper, on some networks, to make
calls within a call group. You can save ten groups.
Alice_UG_R1A.book Page 34 Tuesday, May 18, 2004 11:55 AM