User's Manual

78
More features
R1A Draft for US FCC approval only
Code memo
Instead of having to remember all the different
security codes for credit cards, for example, you
can save them in the code memo in your phone.
Then all you need to remember is the passcode to
open the code memo. You can save a maximum of
10 codes in the code memo.
Checkword and security
To confirm that you have entered the correct
passcode for the code memo and to prevent
unauthorized access to your codes, you must enter
a checkword.
When you enter your passcode to open the code
memo, the checkword is shown for a short time. If
the passcode is correct, the correct codes are
shown. If you enter the incorrect passcode, the
checkword and the codes that are shown are also
incorrect.
Factors strengthening the security of the code
memo function are:
• You get no feedback about whether the passcode
is correct, except for the checkword, and only
you know the checkword.
• All codes are encrypted in the phone.
• When you access your codes, they are shown for
a limited time only.
To open code memo for the first time
1 } Organizer } Code memo. A message with
instructions is displayed } Continue.
2 Enter a four-digit passcode to open code memo
} Continue.
3 Re-enter the new passcode to confirm.
4 Enter a checkword (maximum 15 characters) }
Done. The checkword can consist of both
letters and numbers. The next time you open
the code memo, your checkword appears after
you enter the passcode, and then your added
codes are shown.
To add a new code
1 } Organizer } Code memo and enter your
passcode } New code } Add.
2 Enter a name associated with the code, for
example, the name of the credit card company
} Continue.
3 Enter the code } Done.
UG_R1A.book Page 78 Thursday, June 17, 2004 10:59 AM