User's Manual

61
Entertainment
R1A Draft for US FCC approval only
To turn the ringtone on or off
Press and hold from standby. All signals
except the alarm signal are turned on or off.
To set the ringtone volume
1 } Settings } the Sounds & alerts tab } Volume
and press or to decrease or increase the
volume.
2 } Save to save the setting.
Caller-specific ringtones
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a
personal ringtone to up to ten callers,
% 21 To add
a picture or a personal ringtone to a contact.
Vibrating alert
You can choose to be notified of an incoming call
by the buzzing of the vibrating alert. You can set:
• On – all the time.
• On if in Silent – on when the ring volume is
turned off or when you have set the phone to
silent.
• Off – all the time.
To set the vibrating alert
} Settings } the Sounds & alerts tab } Vibrating
alert and select the setting you want.
Sounds and alerts options
From Settings } the Sounds & alerts tab, you can
set:
• Message alert – select how you want to be noti-
fied of an incoming message.
• Key sound – select what sound you want the
keys to make when you press them.
Composing
You can compose and edit melodies to use as
ringtones using the MusicDJ
™
. A melody consists
of four tracks – Drums, Basses, Chords and
Accents. A track contains a number of music
blocks. The blocks consist of pre-arranged sounds
with different characteristics. The blocks are
grouped into Intro, Verse, Chorus, and Break. You
compose a melody by adding music blocks to the
tracks.
To compose a melody
1 } Entertainment } MusicDJ™.
UG_R1A.book Page 61 Thursday, June 17, 2004 10:59 AM