User's Manual

27
Calling
R1A Draft for US FCC approval only
magic word is especially suitable when using a car
handsfree kit.
To activate and record the magic
word
1 } Settings } the General tab } Voice control }
Magic word } Activate.
2 Instructions appear. } Continue and lift the
phone to your ear. Wait for the tone and say the
magic word.
3 Instructions appear. } Continue and select the
environments in which you want your magic
word to be activated. You can select several
alternatives.
Voice answering
You can answer or reject incoming calls by using
your voice, when using a portable handsfree or a
car handsfree kit.
To activate voice answering and
record voice answer commands
1 } Settings } the General tab } Voice control }
Voice answer } Activate.
2 Instructions appear. } Continue and lift the
phone to your ear. Wait for the tone and say
“Answer”, or another word. If the recording
sounds ok } Yes. If not } No and repeat step 2.
3 Say “Busy”, or another word } Yes.
4 Instructions appear. } Continue and select the
environments in which you want voice
answering to be activated. You can select
several alternatives.
To answer a call using voice
commands
When the phone rings, say “Answer” and the call is
connected.
To reject a call using voice
commands
When the phone rings, say “Busy”.
The call is rejected. The caller is diverted to
voicemail, if activated, or hears a busy tone.
Choose a long, unusual word or phrase that can easily
be distinguished from ordinary background speech.
You cannot use voice answering if you have selected
an MP3 file as ringtone.
UG_R1A.book Page 27 Thursday, June 17, 2004 10:59 AM