User's Manual

Calling 33
5. Lift the phone to your ear, wait for the tone and say
the command that you want to record. The voice
command is played back to you.
6. If the recording sounds OK, press
Yes to save the
voice command. If not, press
No and repeat step 4.
7. Repeat steps 4 and 5 for each voice command
you need.
You also need to record voice commands for each
contact name, for example, “John”.
To record a voice command for a contact name
1. Scroll to Settings, Voice control, Voice dialling,
Edit names, New voice.
2. Select a contact.
3. Follow the instructions in the display.
An icon appears next to a contact name that has a
voice command.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive an
incoming call from that contact.
• To turn the caller name On or Off, scroll to Settings,
Voic e c o ntrol , Caller name.
Voice dialling
To make a call with Voice dialling
1. From standby, press and hold a volume key for
one second.
2. Lift the phone to your ear, wait for the tone and say a
name, for example “John”. The name is played back
to you.
3. If you have several numbers for that contact, after a
second tone, say the number type,
for example, “home”.
The number type is played back to you, and the call
is connected.
From standby, you can also initiate voice dialling,
voice profiles and voice control of sound
recordings by:
• Pressing and holding a volume key.
• Pressing the handsfree button (when using a
portable handsfree or a Bluetooth headset).
• Saying the magic word. See “The magic word” on
page 35.
T628UG.book Page 33 Thursday, October 30, 2003 1:23 PM