User's Manual

31
Before Using the Terminal
*1 A sticker bearing mark is attached at the time of
purchase.
*2 The antenna is built into the terminal. Covering
around the antenna with your hand may affect the
quality of communications.
*3 A sticker bearing the CE mark, FCC ID, IMEI
information, etc. is attached. Please do not peel off
the sticker or remove the nameplate.
❖
Note
･
Do not put a sticker or other material on the
proximity/light sensor.
･
The back cover cannot be removed. Attempting to
remove the back cover with excessive force may
cause damage or malfunction.
･
The battery is built into the terminal and not removal.
The docomo nano UIM card is an IC card
recorded user information such as your
phone number etc.
･
You can use the terminal with a docomonano
UIM card. If you have a docomo mini UIM
card, UIM, or FOMA card, bring it to a Shop to
replace it with a docomo nano UIM card.
･
When docomo nano UIM card is not inserted
to the terminal, making calls, packet
communication, etc. are not available.
･
For details on the docomo nano UIM card,
refer to the docomo nano UIM card manual.
･
If a microSD card is installed, be sure to
unmount it (to disable reading/writing)
before installing or removing a docomo
nano UIM card (P.183).
･
Opening/closing the cover of the docomo
nano UIM card/microSD card slot (P.25).
■ Security codes of the docomo nano
UIM card
The docomo nano UIM card has a security
code called a PIN code. The code is set to
"0000" at subscription, which you can
change by yourself (P.170).
❖
Information
･
Please be careful not to touch or scratch the IC when
you handle the docomo nano UIM card. Doing
so may cause malfunction or damage.
nano UIM card