User's Manual

Pairing 10
Draft for Sony Ericsson Internal Use Only
2. In the phone, scroll to Extras or Connect, ,
Bluetooth, , Paired devices, , Add device,
, Phone initiates, .
3. A list of device types that you can pair with your
phone appears. Scroll to Headset, . Make sure
that the HBM-30 is within 1 m (3 ft) of the phone.
HBM-30 appears in the display. Press .
Enter the HBM-30 passkey (0000), . The
phone pairing procedure starts.
4. You may now replace the given HBM-30 name with
a personal name tag, . When pairing has been
completed, the icon appears and the text
Pairable disappears from the display.
Note: To pair the HBM-30 with another make of
phone, see the phone’s user documentation on
pairing. The HBM-30 passkey is 0000.
Resetting the HBM-30
HBM-30 can be reset to its default settings. This also
clears current pairing.
To reset the HBM-30
• With the HBM-30 in pairable mode, press and hold
both and for at least 4 seconds. The
dispalay shows Factory Set and it will swtich off.
When turned on again it will start up exactly as the
first time used.
Enrico UG.book Page 10 Wednesday, January 22, 2003 1:51 PM