User Manual

6 Using your Chatpen
Using your Chatpen
Note: The paper you write on must be marked with “Digital paper enabling
Anoto functionality”.
Turning your Chatpen on/off
• Remove the cap to turn on the Chatpen.
Wait for the Chatpen to vibrate once and the light to turn green.
The Chatpen is now ready to use.
• Put the cap back on the Chatpen to turn it off. To save power
and to protect the lens from dirt, always keep the cap on when
not using the Chatpen.
Writing and drawing
When writing, an intense green light on the Chatpen indicates
that the Chatpen is registering the strokes. Vibration when writing
indicates problems.
• Write and draw on the drawing
area of the paper, not too near
the edges.
• Hold the Chatpen with the lens
facing the paper.
• Do not block the lens when
writing.
You can interrupt your writing and
put on the cap (turn off the Chatpen)
to continue later. Whatever you
write or draw is saved in the
Chatpen until its memory is full.
See “Using notepads and the
Chatpen memory” on page 8.
CHA-30-R2A.book Page 6 Thursday, December 13, 2001 10:44 AM