User Manual

Sending messages 9
Sending messages
The paper that you use with your Chatpen contains character fields
and check boxes. The most common functions are described below.
Please also refer to the instructions for the paper product that you
are using.
Note:
When sending, keep your Chatpen within a range of a few metres from
the phone it is paired with, with no solid objects in between. You can use your
Chatpen for new notes, or put on the cap, while the phone is sending.
Sending e-mail or fax messages
1. If there is a at the top of the page, tick it.
If there is a on the first page only, tick it the first time you
use your notepad. If you tick it a second time, you will lose your
old notes.
2. Write or draw your message.
3. In the To field on the paper, do one of the following:
• Write the first characters of a contact from the phone book.
• Write the full e-mail address or fax number (including area
code). Both capitals and lower case letters can be used.
• Leave empty (if using E-mail to myself or if using the phone
list of addresses or numbers last used).
4. Tick one of the boxes E-mail, Fax or E-mail to myself (the
Chatpen vibrates once).
5. Tick to send (the Chatpen vibrates twice).
6. Do one of the following depending on your choice in step 3:
• If you used your phone book, a list of suggested names appears
in the phone display (the first time, this may take several
minutes). Select the correct name. If none of the names is
correct, select Find contacts, press
YES. Edit the characters
(see “Editing ticks and characters” on page 12), press YES.
Repeat this instruction.
• If you wrote the full address or number, make sure it appears
correctly in the phone display. If not, edit the characters (see
“Editing ticks and characters” on page 12).
CHA-30-R2A.book Page 9 Thursday, December 13, 2001 10:44 AM