User's Manual Part 2

170 Troubleshooting
Preliminary
Note Make sure potential fax callers do not try to send a fax to
your P800 as they can experience a number of retries before the
fax transmission is stopped.
Indicator light
Blinks red
This indicates that the battery is running low and soon needs
recharging or replacing with a spare.
Note With Vehicle Handsfree (VHF) equipment, make sure that
the following are inserted or connected: your P800 and its
holder, the fuse in the fuse holder, and/or the external antenna.
Does not blink
If the indicator light at the top of your P800 does not blink and
no network is displayed there is no network within range. See
“No network” on page 170.
Memory/Disk full
Due to memory limitations, your P800 has no more space
available to save or store information.
Warning! Make sure regular backups are made with
Communications Suite to reduce the risk of lost or corrupted
information.
To free up memory, delete unused or old:
•Calllogs.
•Contacts.
• Messages.
• Calendar To-Dos or appointments.
• WAP history or bookmarks.
•Notepadnotes.
No network
This indicates that no network is within range. The reason for
this is either:
1. You are in an area that is not covered by a network.
2. The received signal is too weak, possibly because you are
being shielded from the signal. Move to obtain a sufficiently
strong signal. Check your display signal strength indicator.
System failure
In case of a system failure, your P800 will flash an animated
warning. To recover, please restart the P800 like this:
P800_UM.book Page 170 Wednesday, August 28, 2002 4:19 PM