User's Manual Part 2

166 Getting started with Internet and Messages
Preliminary
5. Tap Done.
To connect to a GPRS account
1. In the login dialogue, tap
Generate .
2. Select the appropriate
Vendor and Token.
3. In the vendor-specific Generate Passcode dialogue, generate
the one-time password.
4. Tap
Copy .
5. Return to the login dialogue, enter your user name if required
and tap
Paste to enter the one-time password in the Pin box.
6. Tap
Done.
Tip Many dialogue details when using secure access are
vendor, system and network specific. You should contact the
administrator of the network you wish to access to get the
correct information.
GPRS - data logs
Icons on the status bar let you overview the information on data
connection calls.
A combined signal strength and GPRS signal icon provides
information on the GPRS service status. The GPRS connection
status appears above the signal strength icon. There are three
states for the icon, unavailable , available and active .
The HSCSD/CSD and GPRS icons are displayed during
a data connection. Where GPRS is suspended, for example, the
GPRS suspended state is indicated by a combined icon .
There are three states for the GPRS icon: Active , active
transferring data (alternates between and ) and
suspended . Any data transfer either received or sent
activates the GPRS active icon for 2 seconds.
Connection information
When you select the data connection icon, during an active data
connection, a menu appears with the choices
Information and
Disconnect .
• Select
Information to view information on the connection.
• Select
Disconnect to end the connection.
GPRS status information
When the signal strength icon is selected, network, GPRS status
information and, if applicable, GPRS error text appear.
GPRS data log
A new GPRS data log entry is created when a GPRS account
establishes a connection for the first time. If there is an existing
data log associated with the current GPRS connection, this is
updated.
P800_UM.book Page 166 Wednesday, August 28, 2002 4:19 PM