User's Manual Part 2

164 Getting started with Internet and Messages
Preliminary
To edit a previously created DUN entry
1. Start the
Dial-Up Networking Wizard from the Sony Ericsson
folder of the Start menu on your PC.
2. Modify a Dial-Up connection.
3. Select the desired connection from the list.
4. Follow the instructions in the Wizard.
CSD connections
To set up a CSD (GSM Data) connection you will need to install
your P800 as a modem manually.
To set up a Dial-Up entry for CSD
1. On the PC, open the Control Panel.
2. Choose to install a new modem.
3. Choose your P800 as the modem.
4. Select the port where the P800 is connected.
5. Confirm the selection. A new DUN connection has been
created.
Connecting
To connect using a DUN entry created by the wizard
1. If you are connecting by cable, set your P800 to
Modem cable
connection mode.
2. Use any conventional method to make a connection:
– Click the Desktop short-cut created by the wizard.
– Select the entry from within the system DUN folder.
– Run an application that has built-in support for using
DUN entries (for example a browser or e-mail client).
Secure access
If you need access to a network that requires secure access
(often known as “strong authentication”), for example a
corporate intranet, you can set up the Internet account you use to
log in to that network to use secure access and generate the
required one-time password when you make the connection.
Your P800 supports the following secure access systems:
• SecureID from RSA
• DigiPass from Vasco
• SafeWord from Security Computing
If you have a separate device or application that requires one-
time passwords according to one of these systems, you do not
need a separate hardware token generator (Hard Token). Your
P800 can generate passwords that are not associated with an
Internet account.
You manage secure access in your P800 using Secure Tokens:
P800_UM.book Page 164 Wednesday, August 28, 2002 4:19 PM