User's Manual Part 2

Getting started with Internet and Messages 163
Preliminary
You link the laptop to your P800 using Bluetooth wireless
technology infrared, or cable (USB or serial).The
connection over the air can be by any of the bearers that your
P800 supports:
•GPRS
• HSCSD (High-speed Circuit Switched Data)
• CSD (Circuit Switched Data).
A Windows® modem driver file and a PC utility, the
Dial-Up
Networking Wizard
is provided on your PC suite for P800 CD. The
wizard will help you configure DUN (Dial-Up Networking)
entries on your PC for GPRS and HSCSD connections.
Once paired with a Bluetooth-enabled laptop, your P800 is
ready to make a connection to the Internet or corporate network.
Because Bluetooth is wire-free and requires no line-of-sight
alignment, you can place the laptop in a comfortable position
and let your P800 remain in your pocket, briefcase, or even be
placed up to 10 metres away.
If you wish to use an infrared link, the range is typically up to 1
metre. The two infrared 'eyes' must be kept in line of sight, at an
angle of no more than approximately 30 degrees.
The Dial-Up Networking Wizard
The wizard simplifies creating GPRS DUN connections by
setting the proper values in the PC DUN entry and linking the
entry to one of the GPRS configurations in your P800. You can
also view and modify the GPRS settings in the P800.
For HSCSD DUN entries, it updates the modem settings such
that the specified data rate and type of bearer (ISDN / Analogue)
will be used when you make a DUN connection.
You can view or change the DUN entries created with the
wizard using the standard Windows® DUN user interface.
The Dial-Up Networking Wizard software included in the
PC
suite for P800
must be installed in your PC and your P800 must be
connected to the PC via cable, infrared or Bluetooth wireless
technology.
You should have any information concerning, for example,
phone numbers, names of servers or domains, that the server
that you want to connect to may require.
To set up a GPRS or HSCSD (High-Speed Circuit Switched
Data) connection using the Dial-Up Networking Wizard
1. Start the
Dial-Up Networking Wizard from the Sony Ericsson
folder of the Start menu on your PC.
2. Choose Create a new Dial-Up connection.
3. Follow the instructions in the Wizard.
P800_UM.book Page 163 Wednesday, August 28, 2002 4:19 PM