User's Manual Part 2

Installing applications 149
Preliminary
From the P800
Program packages can also be downloaded to your P800 from
the Internet or from a Memory Stick. When downloading a file
from the Internet, the installation will start automatically when
the file is completely downloaded to your P800. The procedure
below describes installation of application packages already in
the P800 but not yet installed.
Installing applications in the P800
1. Select
> Applications > Install .
2. Select software in the list.
3. Select
Install. If the software is certified, an information
dialog will be shown with the name of the software, version
and supplier. Select
Install again.
4. Now, depending on the software, you may be prompted to
replace a previous installation, select language, memory
location and select other installation options.
5. Installation is complete. Select
Done .
Removing applications in your P800
It is sometimes necessary to remove installed applications and
user data to free up memory.
Removing applications in the P800
1. Select
> Applications > Uninstall and then select software to
remove.
2. Confirm selection.
3. Select
Done .
Note If you delete an application from your P800, any copy on
your PC (including backups) will be deleted the next time you
synchronize with your PC.
Tip See also
Master Reset and Storage Manager in Control Panel for
more options regarding removal of applications and user data.
P800_UM.book Page 149 Wednesday, August 28, 2002 4:19 PM