User's Manual Part 2

Control panel 141
Preliminary
To enable Cell Information
• Select the Cell Information check box
To turn Area Information on
•Checkthe
Area Information check box. Received messages
will be displayed and automatically stored in the
Area Info
Inbox
when dismissed.
The list shows all the channels that you have defined on your
P800. The check box for each channel shows if it is on (checked,
ready to receive messages) or off (cleared, not active):
To add a new channel
1. Select
New .
2. Enter the number of the new channel in the New Channel
dialogue. Channel numbers can be from 0 to 999. If there are
toomanychannelsdefined,
New will be disabled and you will
see a message:
Maximum channels on SIM .
Channel numbering is operator dependent. Please consult
your network operator for information.
To turn a channel on or off
• Select the channel in the list and check the check box. To turn
it off, clear the check box.
To delete a channel
• Select
Delete . Since deleting a channel cannot be undone, you
will be asked to confirm the delete. Deleting the channel will
also delete any stored Area Information messages for that
channel in your Area Info Inbox.
Alerts
Your P800 can notify you when a new message arrives with a
different sound for each type of message that it can receive.
To set up notification, select
Alert.
If you check the Display notification message check box, you will
also see a notification message.
For each type of message you can either
• Select the
Default Melody ,or
• Select
Find Melody to open the Select audio dialogue, where
you can browse through your folders to pick a melody from
those stored on your P800.
Secure tokens
Your P800 supports secure access systems from a number of
vendors. You manage secure access by using Secure Tokens.
Read more about secure access in “Secure access” on page 164.
P800_UM.book Page 141 Wednesday, August 28, 2002 4:19 PM