User's Manual Part 2

Control panel 135
Preliminary
To Edit an Internet account
1. On the
Accounts tab, select the account in the list.
2. Select
Edit .
3. Change your settings as desired.
4. Select
Done .
Note If you change the
Connection type, all account data for that
account will be deleted.
To
Delete an account
1. On the
Accounts tab, select the account in the list.
2. Select
Delete .
3. Select
Done .
Other tab
You can use the Dial-Up timeout and GPRS timeout settings to set
up your P800 to disconnect automatically from the Internet, if
you're not using it. The connection is broken after the period you
specify has lapsed.
Preferred Mode (bearer preference)
Select
GPRS only if you do not want to be disturbed by incoming
phone calls while browsing the web. All incoming voice (and
GSM data) calls are rejected.
When you have selected
GSM only, no GPRS data connection is
possible.
If you select
Automatic, your P800 will let you answer incoming
GSM calls while having normal GPRS functionality. A GPRS
data connection will be temporarily interrupted by a voice call.
IP security manager
The IP security manager displays stored policies and only one
policy can be activated at a time.This is used for secure
connections over the Internet, typically to a corporate intranet.If
needed, your company IS department will supply the necessary
information.
There are two types of passwords needed:
• IP security password: is to be set when activating the very
first policy, that is, this password is only set once, but it is
possible to change it later at any time by tapping the
Password button.
• Activation password: is needed when a policy is activated
for the first time and the supplier of the policy gives this.
Language
Use this list of all languages stored on your P800 to change
language. The highlighted entry is the language presently in use.
P800_UM.book Page 135 Wednesday, August 28, 2002 4:19 PM