User's Manual Part 2

126 Control panel
Preliminary
• You can also set how your P800 should act when receiving
beamed items:
Cable
Use Cable to set the cable connection mode and the connection
parameters used when communicating through your P800's
cable port.
Select
Control Panel > Connections and select Cable to:
• Choose the cable connection mode: when connecting via
cable the P800 must be set in PC connect mode or Modem
mode, see table below.
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P800 via the desk stand to a USB port on
your PC, use the following (default) settings:
Tip You can set the cable connection mode when the flip is
closed by selecting
Applications > Connections >
Cable.
Certificate manager
Digital certificates ensure that the web or WAP pages you visit,
or any software you install, really are created by the person you
expect.
Certificates may be present on the pages that you view or the
software that you download. Your P800 compares these
certificates with a set of certificates that are stored in
Certificate
manager
to ensure the authenticity of the page or software. If the
certificates do not match, your P800 informs you, and gives you
the following choices:
• Prevent the page being loaded or the software being installed.
• Continue at your own risk.
Off
Bluetooth wireless technology is turned off.
Discoverable
Other Bluetooth-enabled devices can find and
connect to your P800. To pair with another device,
your P800 must be
Discoverable.
Always receive
Receives the entry automatically.
Ask first
You wil l be sh ow n a Connection request that you
can accept or reject.
Never receive
Rejects the item automatically.
PC connect mode Modem mode
• Synchronization
• Installation of software
• Backup and restore
• P800 as a modem
• Phone Book Manager (PC
software)
Baud rate
460800
Parity
None
Stop bits
1
Character length
8
Flow control
CTS/RTS
P800_UM.book Page 126 Wednesday, August 28, 2002 4:19 PM