User's Manual Part 2

122 Personalizing your P800
Preliminary
Picture format for the screen saver is 208 x 320 pixels.
Adding images to your Contacts
You can store a picture with
each entry in Contacts. See
“Managing contacts” on
page 55.
Pictures are easily taken using
the CommuniCam (see
“CommuniCam and Pictures”
on page 94) though of course
other images can be used.
If your network operator provides a CLI (Calling Line Identity)
service, your P800 can display the contact's picture together
with the other information when an incoming call is received
with a CLI matching that contact (not all numbers can be
displayed). The contact's picture is also displayed when making
a call.
To show the contact’s picture when receiving an incoming call
1. Select
Phone > Edit >Preferences > Incoming call picture
2. Select the Show picture for incoming calls check box.
3. Tap
Done .
Ring signals
Your P800 can play both iMelody format and polyphonic ring
signals (WAV, AU, AMR, and MIDI sound file formats). You
can add as many ring signals as desired, subject only to
available file space.
A ring signal may be selected for an entry in
Contacts ,so
that the caller can be identified by the ring signal that is played.
You can use a recording as a ring signal. See “Voice memo” on
page 92. Choose between a recording you have made yourself,
and a recording you may have downloaded, transferred from
your PC, or received via e-mail, EMS message or MMS
message.
John Smith
[phone]
11:03
End call
P800_UM.book Page 122 Wednesday, August 28, 2002 4:19 PM