User's Manual Part 1

Messages 67
Preliminary
If your P800 cannot connect to the e-mail account, automatic
download will fail, and will be displayed next to the e-mail
account. Check, if downloads are scheduled to occur from the
same location each time, that the reception in that location is
good enough.
A scheduled download will fail if your P800 is engaged in a
voice call. It may fail if it is connected to another ISP that is,
through a different Internet account than specified for the e-mail
account.
If e-mail messages are not downloaded because a scheduled
download fails, they will be downloaded during the next
successful connection.
You can select an e-mail account that uses Dial-Up rather than a
GPRS account but automatic download will fail if your P800 is
not connected to the Internet when downloads are scheduled.
Area information
Area information messages are text messages that are sent to all
subscribers in a certain network area, for example, a local traffic
report. When you receive an area information message, the
message automatically appears on the screen. When you dismiss
the information, it will be stored in the
Area Info Inbox until it is
written over by a new message received on the same channel.
Please consult your service provider for more information about
availability of area information services and area information
channel numbering.
To add an area information channel
1. In Control Panel, select
Connections > Messaging accounts >
CBS
.
2. Check the
Area information check box.
3. Select
New .
4. Enter the desired
Channel number and check the Subscription
active
check box.
5. Select
Done .
To remove an area information channel
1. In Control Panel, select
Connections > Messaging accounts >
CBS
.
2. Select the channel to be deleted.
3. Select
Delete and confirm the removal by selecting Yes in the
subsequent dialog. Any messages belonging to that channel
will also be deleted.
Get and send
To get and send messages for one specific account
1. Select
Messages .
2. Select the desired account (text message, multimedia
message or e-mail for example).
3. Select
Get&send.
P800_UM.book Page 67 Wednesday, August 28, 2002 4:19 PM