User's Manual Part 1

64 Messages
Preliminary
To play a received multimedia message
• The first time a MMS is opened it plays automatically. The
next time you open the MMS you can play it by pressing the
Play Button (flip open) or choosing
Play from the menu (flip
closed)
To set the download method for receiving multimedia
messages, manual or automatic
1. In
Control panel, select Connections > Messaging accounts >
MMS > Download method.
– Manual means that only headers will be downloaded and
can be viewed. The full message will be downloaded to
your P800 when you select
Receive .
–
Automatic means that the MMS is downloaded and can be
read like any other message. There is no intermediate
step.
E-mail
Writing e-mails
To write a new e-mail
• Select an e-mail account and select
Message > New or open an
existing e-mail and select
Message > New.
If you leave the message before sending it, it will automatically
be stored in the
Draft folder (unless it was created from Outbox).
To mark an e-mail as urgent
• On the address tab, select
High in the Priority list.
Tip If you are creating several e-mails, you can reduce
connection time by saving them to
Outbox and then connect and
send them all at the same time.
To save an e-mail to Outbox
1. Select
Send.
2. Select Save to Outbox > Done.
To enter addresses from Contacts when writing an e-mail
1. Select
To:
2. In the Find contact dialogue select the check box for each
entry you want to send the e-mail to.
3. Select
Done .
Tip To enter several addresses manually (without using
Contacts) in a text message or e-mail: enter a comma between
each address.
Sending e-mail
To send an e-mail message
• Select
Send > Send immediately .
P800_UM.book Page 64 Wednesday, August 28, 2002 4:19 PM