User's Manual Part 1

46 Phone
Preliminary
Incoming call alert
This option lets you choose individual ring melodies for voice
and data calls. You may use any sound recording or audio file.
You may also set individual volume levels for Handheld,
Handsfree and Car, or let the P800 vibrate.
You may personalize the ring melodies further for individual
contacts, see “Contacts”.
1. Use the stylus to point and drag the bar lever to the preferred
sound level.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume levels may damage hearing.
2. Select the list view and highlight the signal of your choice.
3. Select
Done to activate the changes.
Incoming call picture
• Select the option to automatically show the picture saved in
contacts at incoming calls.
Voice control
The voice control option lets you handle calls using your voice.
Say a “magic word” and then the name of the person you want
to call, and the P800 will try to call the person.
The magic word is used to ensure that the P800 will not call
somebody whose name has just been mentioned by chance.
To enter settings for voice commands
• Select
Phone > Edit > Preferences > Voice control.
In this menu you can:
–Turn
Voice dialing on/off
–Setwhentousethe
Magic word (Handheld, Handsfree or
Car).
–Turn
Voice answer on/off
– Select if the P800 should
Play caller name at incoming
calls.
– Record voice commands for
Magic word , Answer and Busy .
To record a voice command
1. Select one of the options,
Magic word , Answer ,or Busy and
select
Record .
2. Say the “magic word” after the tone
Be sure to use a word that you can remember. For example
“Calling”.
3. Select
Play if you want listen to your recording.
4. Select the voice message options for each P800 profile.
5. Select
Done to exit.
To record voice tags for individual contacts, see “Contacts”.
P800_UM.book Page 46 Wednesday, August 28, 2002 4:19 PM