User's Manual Part 1

44 Phone
Preliminary
Special characters
• Press and hold to insert a pause (represented by the
character
p) in a DTMF (Dual Tone Multi Frequency)
sequence.
• Press and hold to insert the international call prefix
+ .
Change phone volume
During a call you can use the Jog Dial to change the phone
volume.
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume levels may damage hearing.
• During an active call, pressing and holding mutes the
microphone. Pressing reactivates the microphone.
• When entering text in flip closed mode, pressing erases
the last entered letter. Pressing and holding deletes all
text in the active field.
• When in stand by mode, pressing and holding puts the
phone in silent mode.
Banking services
You can use your telephone banking services or other tone based
services.
The P800 provides different ways of sending tones during a call:
• Pressing keypad keys during an active call, like on most
landline phones.
• Including tone digits already in the call set up. After the
phone number, but before the digits, press and hold to
insert a
p. Then insert your digits. Finally send away the call
by pressing .
• Program digit sequences into your Contact card for the bank.
Each digit sequence to be sent as tones must begin with a
p .
Once your call to the bank has been established and you want to
send your pre-programmed digit sequences, choose
Show contact
on the menu to get to the Contact card with the tone sequences.
Warning! Never program any personal codes into your P800.
Set-up
Speed dial numbers
To set a speed dial number
1. Select from the button bar.
2. Select an empty position.
3. Select the desired contact.
4. Select
Done .
P800_UM.book Page 44 Wednesday, August 28, 2002 4:19 PM