User's Manual Part 1

Phone 43
Preliminary
If an incoming call is answered during a conference call, the
conference call will be put on hold.
To start a conference call
• Select the
Join calls button, or select Phone > Join calls from the
menu.
To extract a party
• Tap the required party and choose
Extract from the pop up
menu.
This causes the conference call to be put on hold, the selected
party is then removed from the conference and becomes the
active call.
To release a party
• Tap the required party and choose
Release from the pop up
menu.
This ends the call to the selected party.
Note If you have set up the conference, you still have to pay for
the total time.
Emergency calls
If you initiate a call to a number which is identified as an
emergency number,
Emergency call will be shown.
An emergency call can be made without PIN or PUK codes. You
can end the call using the menu key.
Note Emergency calls are not confined to the network of your
operator; they can be made as long as you have coverage from
any GSM network.
Hints and smart functions
Speakerphone
If you open the flip during a call, the speaker phone function is
activated and the volume will increase. This lets you continue
the conversation while using other functions of the P800.
Silent mode
Press and hold in standby view, flip closed, to put the
phone in silent mode. Press again to turn off silent mode.
Note When silent mode is on, this will also silence personal
handsfree.
Voice mail
In flip closed, you can call the voice mail number if you press
and hold .
P800_UM.book Page 43 Wednesday, August 28, 2002 4:19 PM