User's Manual Part 1

38 Phone
Preliminary
2. Make a second call, or
answer a call. The first call
is put on hold.
The held call is shown
with a grey background.
• Toswitchbetweenthe
calls,press ,then
select
Switch calls (could be
network dependent).
• To end the active call and continue with the held call,
press and select
End active call .
• To join the calls to a conference, press and select
Join
calls
.See“Conference calls” on page 42
To end a call
• Press , or press the Jog Dial.
To reject a call
• Press , or press , and select
Reject .
To silence the ring signal
This does not affect the call. It just silences the ring signal. The
calling party will not notice that you have silenced the call.
• Press , or press , and select
Mute .
To make a call using voice control
• Say the “magic word” and then the name of the person you
want to call, and the P800 will connect you. For more
information on, see “Voice control” on page 46.
Note This option requires that the number of the calling party is
provided with a voice recording. See“To record a voice
command” on page 46
Tip The magic word is not needed if you use a portable
handsfree or a Bluetooth™ wireless technology headset. Press
the headset call button and say the name of the person you want
to call.
Options in flip open mode
The following options are available during or after a call:
• End call.
• Hold call.
• Add to contacts (displayed if the phone number of the active
call is known, and not found in the contacts database).
• Show contact (displayed if the phone number of the active
call is known, and appears in the contacts database).
• Transfer sound (Only when Bluetooth™ wireless technology
headset has audio).
• Show cost / Hide cost.
John Smith
[phone]
11:03
Ann Jones
(w)
(h)
End active call
P800_UM.book Page 38 Wednesday, August 28, 2002 4:19 PM