User's Manual Part 1

General functions 35
Preliminary
The PIN2 lock cannot be deactivated. The code can be changed
by a user who knows the old code. Some SIM cards do not have
a PIN2 lock.
Device lock
The device lock protects your P800 against unauthorized use. If
the device lock is set to
When SIM changed , it means that normally
the P800 is not locked. However, if the SIM is changed, the
P800 asks you to enter the code to unlock the P800 before you
can use it. Thus, if someone steals your P800 and puts another
SIM card into it, they will not be able to use it.
To activate the device lock
1. Select
Phone > Edit > Preferences > Locks
2. Select a lock option.
3. Select
Done .
You can choose to have the P800 locked every time you turn it
on, locked when the SIM card has been changed, or unlocked.
It is also possible to use the device lock in combination with the
screen saver. Just mark the checkbox
Control panel > Device >
Display>Phonelockprotected
to have the device lock activated
when the screen saver goes on.
Change code
To change a code
1. Select
Phone> Edit> Preferences> Locks.
2. Select Change Codes.
3. Select the code you want to change.
4. First enter the old code, then the new one. (To ensure that
you have typed the new code correctly you have to enter it
twice.)
Key lock
This option locks the keys on your P800. This is to protect the
device if the keys are being accidentally pressed.
To activate or change the key lock
• Select
Phone > Edit > Preferences > Locks.
To unlock the keys
• Select
> .
P800_UM.book Page 35 Wednesday, August 28, 2002 4:19 PM