User's Manual Part 1

32 General functions
Preliminary
Extended characters
Write the character above the arrow, then insert the character l
(written from bottom to top) before writing the extended
character. See the Handwriting recognition help topic for
information on how to write these characters.
Removing and attaching the flip keypad
To remove the Flip
1. Use your fingernail to gently lift up and push the cover plate
under and away from the keypad, see picture below.
Note Be careful with the touch-sensitive screen. Never use a
sharp object like a screwdriver.
2. Unlock the catch and lift away the keypad.
3. Attach the flip replacement by first placing the small hooks
by the screen and then press on the curved front part until it is
securely fixed.
To attach the Flip
1. Use your fingernail to gently lift up and push the flip
replacement.
2. If needed, turn the hinge on the keypad to the correct
position, see the figure below.
1
2
P800_UM.book Page 32 Wednesday, August 28, 2002 4:19 PM