User Guide

51
Before Using the Terminal
*1 is always displayed when the terminal is
connected with LTE.
*2 Can be set with the quick setting tool in the Quick
settings panel (P.54). Before using, tap and set
"Do not disturb" to the available quick setting tool.
❖
Information
･
You can select icons to be displayed in the status bar
in "System icons" (P.169).
The main notification icons displayed on the
status bar are as follows.
Connected to a Wi-Fi network with
no access to the Internet. The Wi-Fi
signal is poor.
P. 1 5 9
Portable hotspot (Wi-Fi tethering) ON P.164
Bluetooth function ON P.197
Connected to Bluetooth device P.198
Airplane mode activated P.163
Silent mode (Vibrate) ON P.46
Silent mode (mute) is set/Do not
disturb function
*2
is set to [Alarms
only] or [Total silence]
P. 4 7
Speakerphone ON P.93
Microphone put on mute P.93
Alarm is set P.153
NFC Reader/Writer, P2P function ON P.200
Positioning with GPS
―
Connected to VPN P.166
Data Saver is set P.162
Battery status
―
The battery is charging P.36
Battery is low
―
Charging is required
―
docomo nano UIM card is not
inserted
P. 3 1
Notification icon
New email message P.111
New Gmail message
―
New message (SMS) P.108
New Area Mail P.115
Screenshot saved P.47
Receiving/downloading data
―
Sending/uploading data
―
Notification of data reception etc. via
Bluetooth communication
P. 1 9 9
microSD card is detected/currently
mounted
P. 3 5
Update notification
―
Installation completed P.121
Application update notification
―
Software update notification P.226
NFC / Osaifu-Keitai lock set on the
terminal and docomo nano UIM card
P. 1 2 4
NFC / Osaifu-Keitai lock set on the
terminal or docomo nano UIM card
P. 1 2 4
Omakase Lock set on the terminal
and docomo nano UIM card
―
Omakase Lock set on the terminal or
docomo nano UIM card
―