User Guide

41
Before Using the Terminal
When charging using USB cable A to C 01
(optional), do the following procedures.
1
Insert a Type-C plug of the USB
cable A to C horizontally into the
USB Type-C jack of the terminal.
2
Insert a USB plug of the USB cable
A to C to a USB port of a PC.
･
A sound to indicate the start of
charging is heard, and the notification
LED of the terminal turns on (P.50).
･
If the installation screen for the
terminal's driver software appears on
your PC, please wait a moment for the
installation to complete.
･
When "Install software" screen appears
on the terminal, tap [SKIP] or [CANCEL].
･
When the "Use USB to" confirmation
screen appears, tap [CANCEL].
3
When charging is complete,
remove the USB plug of the USB
cable A to C from the USB port of
PC and then remove the Type-C
plug horizontally from the
terminal.
❖
Note
･
Connect the USB cable A to C correctly. Wrong
connection may cause damage.
Charging with a PC