User's Manual

GM28 INTEGRATOR’S MANUAL
158
LZT 123 7468 P1A
11.12 AT+CNUM Subscriber Number
This command returns the MSISDNs related to the subscriber (this
information can be stored in the SIM or in the ME). If subscriber has
different MSISDN for different services, each MSISDN is returned in a
separate line.
16 Data circuit sync
32 Data circuit async
64 Dedicated packet access
128 Voice L2
1..30 When “no reply” is enabled or queried, this gives the time
in seconds to wait before the call is forwarded. Default
value is 20
<classx> Description
Description Command Possible Responses
Request subscriber
number
AT+CNUM •+CNUM:
[<alpha1>],<number1>,<type1>
[,<speed>,<service>[,<itc>]][<CR>
<LF>+CNUM:
[<alpha2>],<number2>,<type2>
[,<speed>,<service> [,<itc>]][…]]
• +CME ERROR: <err>
•OK
•ERROR
Show if the
command is
supported
AT+CNUM=? • +CME ERROR: <err>
•OK
•ERROR
<alphax> Description
Alphanumeric
string
Associated with <numberx>; used character set should be
the one selected with the Select TE character set
command, +CSCS
<numberx> Description
String type Phone number of format specified by <typex>
<typex> Description
Integer format Type of address, (refer to GSM 04.08 subclause 10.5.4.7)
<speed> Description
data rate As defined in subclause 6.7 GSM 07.07