User Manual

2. CALL CONTROL
89
LZT 123 7263 R1A
2.6 ATO Return to Online Data Mode
Switch to the on-line data mode fromthe on-line command mode during
an active call. Returns ERROR when not in on-line command mode.
2.7 ATP Select Pulse Dialling
Command is ignored, and is implemented for compatibility only. It
would normally cause the next D command to use pulses when dialling
the number.
2.8 ATT Select Tone Dialling
Command is ignored, and is implemented for compatibility only. It
would normally cause the next D command to use tones when dialling
the number.
Description Command Possible Responses
Return to on-line data
mode
ATO[<value>] •CONNECT
•CONNECT<text>
•NOCARRIER
•ERROR
<value> Description
0 Return to on-line data state from on-line command
Description Command Possible Responses
Select pulse dialling ATP OK
Show if the command
is supported?
ATP=? OK
Description Command Possible Responses
Select tone dialling ATT OK
Show if the command
is supported?
ATT=? OK