User Manual

19. SUPPLEMENTARY SERVICES
301
LZT 123 7263 R1A
Test command returns values supported by the TA as a compound
value.
<n> Description
0 Disable the +CSSI result code presentation status in the TA
1 Enable the +CSSI result code presentation status in the TA
<m> Description
0 Disable the +CSSU result code presentation status in the TA
1 Enable the +CSSU result code presentation status in the TA
<code1> Description
0 Unconditional call forwarding is active
1 Some of the conditional call forwarding are active
2 Call has been forwarded
3 Call is waiting
4 This is a CUG call (also <index> present)
5 Outgoing calls are barred
6 Incoming calls are barred
7 CLIR suppression rejected
<index> Description
0…9 CUG index
10 No index (preferred CUG taken from subscriber data)
<code2> Description
0 This is a forwarded call (MT call setup)
1 This is a CUG call (also <index> present) (MT call setup)
2 Call has been put on hold (during a voice call)
3 Call has been retrieved (during a voice call)
4 Multiparty call entered (during a voice call)
5 Call on hold has been released (this is not a SS
notification) (during a voice call)
6 Forward check SS message received (can be received
whenever)
10 Incoming call has been forwarded