User Manual

GM47/GM48 INTEGRATOR’S MANUAL
282
LZT 123 7263 R1A
If Answer command is sent once the timeout expires, an ERROR
response shall be generated.
Values follow GSM 11.14 standard. See General Result byte within
Result TLV corresponding to TERMINAL RESPONSE.
According to GSM 11.14 if the ME receives the "Item dat object for
item 1" as a null data object, then <on_off> shall be set to 0.
The maximum length is fixed. Notice that 227 bytes come from
substracting the bytes corresponding to E2STKM: x,“”
<CR><LF>E2STKM: x,“x” from 255. As a result, an extra parameter
defining the maximum length is not required.
With the coding defined in GSM 11.11, the first byte defines the coding
scheme. As a result, an extra parameter defining the coding is not
required.
Values follow the definition of “Identifier of Item” in “Item” TLV
object, within SET-UP MENU command, as described in GSM 11.14.
The maximum length is fixed. Notice that 226 bytes come from
subtracting the occupied bytes from 255. As a result, an extra parameter
defining the maximum length is not required.
<answer> Description
0 OK. Performed as required: it corresponds to ‘00’
command performed successfully, described in the GSM
standard
1 OK. User Terminated Session: the command was executed
as requested and the user wants to end the proactive
session. It corresponds to ‘10’ proactive session terminated
by the user, described in the GSM standard
2 OK. User requests backwards move: the command was
executed as requested and the user wants to go
backwards in the session. It corresponds to ‘11’ backward
move in the proactive SIM session requested by the user
3 OK. No response from user: the command was executed,
and the user did not react. It corresponds to ‘12’ no
response from user
4 FAILED. Screen is busy
5 FAILED. Command beyond MEs capability. It corresponds
to‘30’.Itwasnotpossibletosuccessfullyintegrateor
remove the list of menu items
<on_off> Description
0 Remove the current menu
1 New menu to be displayed