User Manual

18. SIM APPLICATION TOOLKIT
281
LZT 123 7263 R1A
If <answer> parameter is 4, a failure has occurred and no more
parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.
18.7 AT*E2STKM M2M STK Set Up Menu
The ME passes the parameters within SET UP MENU command to the
external application, so that the STK menu can be built externally, by
means of the unsolicited result code *E2STKM.
The current menu can be removed by sending only the parameter
<on_off> = 0.
Answer command allows the external application to send the
appropriate answer after receiving the unsolicited result code, and
before the timeout expires.
<user_response> Description
integer type The identifier is a single byte between 1 and 29. It
identifies the selected <item_idn> within the items list
<answer> Description
0 OK. Performed as required. It corresponds to ‘00’
command performed succesfully, described in the GSM
standard
1 OK.Userterminatedsession.Itcorrespondsto‘10’
Proactive session terminated by the user, described in
the GSM standard
2 OK. User requests backwards move. It corresponds to
‘11’ Backward move in the proactive SIM session
requested by the user
3 OK. No response from user. It corresponds to ‘12’ no
response from user
4 FAILED. Screen is busy: the text could not be displayed
Description Command Possible responses
Answer to the
reception of SET
UP MENU
AT*E2STKM=<answer>,
<on_off>
• +CME ERROR <err>
•OK
•ERROR
Test if the
command is
supported
AT*E2STKM=? • *E2STKM: (list of supported
<answer>),(list of supported
<on_off>)
• +CME ERROR <err>
•OK
•ERROR