User Manual

GM47/GM48 INTEGRATOR’S MANUAL
280
LZT 123 7263 R1A
18.6 AT*E2STKL M2M STK Select Item
The ME shall pass the parameters within SELECT ITEM command to
the external application by means of the unsolicited result code
*E2STKL.
Command AT*E2STKL allows the external application to send the
appropriate answer after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is be generated.
<prompt_coding> Description
0 Text is coded in unpacked format, using the SMS
default 7-bit coded alphabet, as defined in
GSM03.38withbit8setto0. Itcorrespondsto
data coding scheme of 8 bit
1 Text is coded in packed format, using the SMS
default 7-bit coded alphabet, packed in 8-bit
octets, as defined in GSM 03.38. It corresponds
to data coding scheme of 7 bit GSM default
alphabet
2 Text is coded in UCS2 alphabet, as defined in
GSM 03.38. It corresponds to data coding
scheme of 16 bit UCS2 alphabet
<prompt_text_length> Description
Integer type (0-210) Value indicating the maximum length of field
<prompt_text>
<prompt_text> Description
String type Field of maximum length <prompt_text_length>,
in string type between “”. Coding is defined in
<prompt_coding>
Description Command Possible responses
Answer to the
reception of
SELECT ITEM
AT*E2STKL=<answer>,
[<user_response>]
• +CME ERROR <err>
•OK
•ERROR
Test if the
command is
supported
AT*E2STKL=? • *E2STKL: (list of supported
<answer>),
(list of supported
<user_response>)
• +CME ERROR <err>
•OK
•ERROR