User Manual

GM47/GM48 INTEGRATOR’S MANUAL
278
LZT 123 7263 R1A
18.5 AT*E2STKI M2M STK Get Input
The ME shall pass the parameters within GET INPUT command to the
external application by means of the unsolicited result code E2STKI.
The external application sends AT*E2STKI with the user response.
Command AT*E2STKI allows the external application to send the
appropriate answer after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
<answer> Description
0 OK. Performed as required: the text was displayed. It
corresponds to ‘00’ Command performed successfully,
described in the GSM standard
1 OK.UserTerminatedSession:thetextwasdisplayedas
requested and the user wants to end the proactive
session. It corresponds to ‘10’ Proactive session
terminated by the user, described in the GSM standard
2 OK. User requests backward move: the text was
displayed as requested and the user wants to go
backwards in the session. It corresponds to ‘11’
Backward move in the proactive SIM session
requested by the user
3 OK. No response from user: the text was displayed, and
the user did not react. It corresponds to ‘12’ No
response from user
4 FAILED. Screen is busy: the text could not be displayed
<response_type> Description
0 Response type shall be digits (0-9, *, # and +)
1 Response type shall be SMS default alphabet
2 Response type shall be UCS2 alphabet
3 Response type shall be “Yes/No” response
Description Command Possible responses
Answer to the
reception of GET
INPUT
AT*E2STKI <answer>,
[<response_type>,
<response_length>,
<user_response>]
• +CME ERROR <err>
•OK
• ERROR
Test if the
command is
supported
AT*E2STKI=? • *E2STKI: (list of supported
<answer>),(list of supported
<response_type>),
(list of supported
<prompt_text_length>
• +CME ERROR <err>
•OK
• ERROR