User Manual

18. SIM APPLICATION TOOLKIT
277
LZT 123 7263 R1A
18.4 AT*E2STKG M2M STK Get Inkey
The ME passes the parameters within GET INKEY command to the
external application by means of the unsolicited result code E2STKG.
The external application then sends AT*E2STKG with the user
response.
Answer command allows the external application to send the
appropriate answer, after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
If <answer> parameter is 4, a failure has occurred and no more
parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.
Description Command Possible responses
Answer to the
reception of
GET INKEY
AT*E2STKG=<answer>,
[<response_type>,
<user_response>]
• +CME ERROR <err>
•OK
•ERROR
Test if the
command is
supported
AT*E2STKG=? •*E2STKG:
(list of supported <answer>),
(list of supported
<response_type>),
(list of supported
<user_response>)
• +CME ERROR <err>
•OK
•ERROR
<user_response> Description
String type Field of 1 to 2 bytes length in string type format
between “”. Coding is defined in <response_type>.
Length shall be 2 bytes when coding is UCS2 .
Otherwise it shall be 1 byte