User Manual

275
LZT 123 7263 R1A
18. SIM Application Toolkit
18.1 AT+CPIN PIN Control
See 3.27, AT+CPIN PIN Control
18.2 AT*E2STKS SIM Application Toolkit Settings
Allows the external application to disable/enable the presentation of the
unsolicited result codes corresponding to the STK commands.
Parameter <on_off> is used to disable/enable the presentation of an
unsolicited result code *E2STK. Setting chosen is stored internally so
that it is not necessary to change it each time the ME is switched on.
If the presentation of the unsolicited result codes is disabled, the
messages below are not be sent to the application.
The unsolicited result codes shall be disabled by default.
Description Command Possible responses
Set the presentation of
the unsolicited result
codes corresponding to
STK
AT*E2STKS=<on_off> • +CME ERROR <err>
•OK
• ERROR
Read the current status of
the presentation of the
unsolicited result codes
AT*E2STKS? •*E2STKS:<on_off>
• +CME ERROR <err>
•OK
• ERROR
Test if the command is
supported
AT*E2STKS=? •*E2STKD:listof
supported <on_off>
• +CME ERROR <err>
•OK
• ERROR
<on_off> Description
0 Disable the presentation of the unsolicited result codes
related to STK (default)
1 Enable the presentation of the unsolicited result codes
related to STK